How to remove wallpaper easily
How to remove wallpaper easily
Whether you plan to repaint your walls or apply new wallpaper, professionals agree that old wallpaper should always be removed first. The good news is that in most cases, this is a job you can do yourself, often within one day.
Different types of wallpaper require different removal methods, but the goal is always the same: a smooth, clean wall ready for the next stage.
Prepare the room
Before you start, remove pictures, shelves and decorations from the walls. Move furniture to the centre of the room or, if possible, take it out completely. Protect floors and remaining furniture with plastic sheets, old bed sheets or dust sheets to prevent damage and mess.
Switch off the electricity
Turn off the power in the room and cover sockets and switches with masking tape. As water is often used during wallpaper removal, this step is essential for safety.
Identify the wall and wallpaper type
First, determine whether the walls are solid masonry or plasterboard. Plasterboard is more sensitive to moisture, so use less water and work more carefully.
Next, identify the type of wallpaper. Lift a corner using a scraper:
- if the wallpaper peels off easily in one piece, it is peelable wallpaper
- if only the top layer comes off and paper backing remains, it is a two-layer wallpaper
- if the wallpaper is firmly attached, it is traditional wallpaper that will need moisture to loosen the adhesive
How to remove peelable wallpaper
What you will need
- scraper
- water
- mild soap
- cloths
Method
Lift a corner of the wallpaper with the scraper and slowly pull it away from the wall by hand. Keep your hands close to the wall to avoid tearing. If it does tear, start again from another corner and continue until all wallpaper is removed.
Cleaning the wall
Once the wallpaper is removed, wash the walls with warm soapy water to remove any adhesive residue. Allow the walls to dry completely before continuing.
How to remove traditional wallpaper
What you will need
- water
- wallpaper remover solution
- spray bottle or paint roller
- scraper or stripping knife
- scoring tool, if needed
- step ladder
- mild soap
- cloths
- rubber gloves
Prepare the solution
Mix warm water with the wallpaper remover according to the manufacturer’s instructions and pour it into a spray bottle.
Apply the solution
Apply the solution to a section of wall roughly one square metre in size. Leave it to soak for several minutes so the adhesive softens.
Remove the wallpaper
Use a scraper or stripping knife to remove the wallpaper, working from the bottom upwards. Take care not to damage the wall surface.
Score the surface if needed
If the solution does not soak in, lightly score the wallpaper with a blunt tool to help the liquid reach the adhesive.
Final cleaning
Wash the walls with soapy water. Fill any small holes or imperfections with filler, allow it to dry and lightly sand before proceeding.
How to remove two-layer wallpaper
What you will need
- water
- wallpaper remover solution
- spray bottle or roller
- scraper
- scoring tool
- step ladder
- mild soap
- cloths
- rubber gloves
Remove the top layer
Start by peeling off the top decorative layer from the corners or seams.
Remove the paper backing
Remove the remaining paper backing using the same method as for traditional wallpaper, with water and wallpaper remover.
When nothing else works: steam wallpaper removal
If wallpaper cannot be removed with water or chemical solutions, a steam wallpaper remover is often the most effective option.
What you will need
- steam wallpaper remover or steam cleaner
- scraper
- protective gloves
- eye protection
- water
- mild soap
- cloths
Method
Prepare the steam remover according to the manufacturer’s instructions and allow it to heat up. Wear protective gloves and long sleeves to avoid burns.
Hold the steam plate against the wallpaper to soften the adhesive, then scrape the wallpaper away. Avoid soaking the wall too much, especially if it is plasterboard.
Final steps
Wash the walls with soapy water and allow them to dry completely before painting or applying new wallpaper.
Related articles
How to de-winterise your house
A house that has been unoccupied during the cold winter months and properly winterised needs to be de-winterised before it can be used again in the warmer season. De-winterising means safely restoring all systems that were shut down to protect the property from frost damage. In simple terms, it is the reverse of the winterisation process. This includes turning the water supply back on, reconnecting plumbing, checking electrical circuits and reactivating heating and gas systems. If you hired professionals to winterise your home, it often makes sense to use the same company to de-winterise it. They will know exactly what was done and how to undo it. That said, the process is usually straightforward, and many homeowners choose to do it themselves to save on costs.
Living room renovation that pays off
Whether you are planning a major refurbishment or a smaller DIY update, you will enjoy spending time in your newly renovated living room. The real reward, however, often comes later when it is time to sell and your living room renovation delivers a strong return on your original investment. Below are living room renovation projects that consistently prove worthwhile when it comes to resale value.
How to get rid of damp and mould in your home
Excess damp does not discriminate. It can appear in any type of home, from a studio flat and a standard terraced house to a large detached property. In many cases, damp develops because a property is not given enough attention or early warning signs are overlooked.